[CA11] Installing Navionics Platinum+ to G-Series MFD

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Installing Navionics Platinum+ to G-Series MFD

03-19-19, 02:38 PM

Post: #5

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD

Kevin,

G-Series GPM400s have limited track memory ... see here. You may want to try deleting unneeded tracks. Short of that I could only recommend that you consider backing up the system data and then perform a System Settings and Data Reset to restore the feature. The latter action should only be undertaken if you have an excellent command of how to configure the system. Support for G-Series is now very, very limited.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Installing Navionics Platinum+ to G-Series MFD - polingk - 03-08-19, 01:56 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - Chuck - Raymarine - Moderator - 03-08-19, 02:36 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - polingk - 03-19-19, 02:24 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - Chuck - Raymarine - Moderator - 03-19-19 02:38 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - polingk - 03-19-19, 06:04 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - Chuck - Raymarine - Moderator - 03-20-19, 07:44 AM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - polingk - 03-20-19, 12:08 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - Chuck - Raymarine - Moderator - 03-20-19, 12:35 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - polingk - 04-01-19, 02:02 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - Chuck - Raymarine - Moderator - 04-01-19, 02:41 PM

User(s) browsing this thread: 1 Guest(s)