The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom 3.8.105 Update Fail

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 3.8.105 Update Fail
03-21-19, 03:40 PM (This post was last modified: 03-25-19 10:33 AM by Chuck - Raymarine - Moderator.)
Post: #1
dtfeld Offline
Member
***
 		Posts: 53
Joined: Jan 2018
Reputation: 0
[CA11] Axiom 3.8.105 Update Fail
I attempted to upgrade from LHIII 3.8.97 to LHIII 3.8.105, via direct download to the unit, but it failed twice.

As the unit tried to load the firmware, there was obviously a problem with either the downloaded file or where it was saved/loaded from. I was presented a screen that read as follows...

Top in Yellow read the following

Raymarine Recovery
Left power swipe cycles highlights
Right power swipe activates

Then the following in cyan...

Reboot system now
Apply Update from Primary SD Card Slot
Reboot to Bootloader
Wipe Data/factory reset
Wipe Cache partition
Power Off

It would be nice to be able to save a copy of the downloaded file locally if this is not being done. I assume it is not as the process does not allow a file location to be specified.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Axiom 3.8.105 Update Fail - dtfeld - 03-21-19 03:40 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication