[DG] [DG11] Raytheon ST60 Tridata depth problem

[Derek - Raymarine - Moderator]

Hi jaerikss

Thank you for the feedback, testing in a bucket of water is not usually successful. You can try to reflect the depth signal off a flat glass panel, held about 1m away from the transducer, the angle must be correct to reflect the signal back to the transducer, the depth reading will be wrong due to the operation in air, but it will give you confirmation the transducer and display are working.

The FAQ in this link here will give further information on the test and service method recommended.

Regards

Derek