The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom Problems. ECI-100 YAMAHA Twin F250

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 1 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Problems. ECI-100 YAMAHA Twin F250
03-29-19, 02:16 PM (This post was last modified: 03-29-19 02:37 PM by Chuck - Raymarine - Moderator.)
Post: #1
alimon Offline
Junior Member
**
 		Posts: 5
Joined: Jan 2019
Reputation: 0
[CA11] Axiom Problems. ECI-100 YAMAHA Twin F250
Hello,
I have a Twin F250 hooked to the Axiom 9 via ECI-100 and Seatalk NG. All nice and new. Software updated.

I run the engine ID tool form Axiom and it gets done successfully. When looking at the engines, I can only see one at the time. If I start the second engine, all freezes and connection gets lost.

Additionally, Form the engine that I can see, I only see the Temp, RPM´s and oil pressure. The batt voltage, and Trim is not there. But can be seen on my yamaha gauges, so the senders are ok.

Please let me know what you think.
Alex


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Axiom Problems. ECI-100 YAMAHA Twin F250 - alimon - 03-29-19 02:16 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication