Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Aisle 650
05-24-16, 10:14 AM (This post was last modified: 05-24-16 01:22 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: AIS 650
Welcome to the Raymarine Forum Alan,

An AIS Connection Lost alert is typically associated with having more than one source of GPS data within the marine electronics system and not having configured the system to utilize a single specified source (HOME->SET-UP->SYSTEM SETTINGS->DATA SOURCES) for its GPS data. Alternatively if using an external GPS sensor (ex. Raystar 130, etc.) to supply the MFDs with GPS data, then the internal GPS sensors of the MFD(s) (HOME->SET-UP->SYSTEM SETTINGS->INTERNAL GPS) may be configured OFF.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Aisle 650 - AJS - 05-24-16, 08:06 AM
RE: AIS 650 - Chuck - Raymarine - Moderator - 05-24-16 10:14 AM
RE: Aisle 650 - AJS - 05-24-16, 10:40 AM
RE: Aisle 650 - AJS - 05-24-16, 01:39 PM
RE: Aisle 650 - AJS - 05-26-16, 08:25 AM
RE: Aisle 650 - AJS - 08-30-16, 09:13 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)