The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Radar v / [CA] [CA11] Q24c - need to track a target in order to get the vessel speed and bearings?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Q24c - need to track a target in order to get the vessel speed and bearings?
04-02-19, 03:28 PM (This post was last modified: 04-02-19 03:58 PM by Chuck - Raymarine - Moderator.)
Post: #1
ray18 Offline
Member
***
 		Posts: 91
Joined: Feb 2017
Reputation: 0
[CA11] Q24c - need to track a target in order to get the vessel speed and bearings?
Thanks in advance.

2 questions for Q24c Quantum radar:

(1) do i need to track a target in order to get the vessel speed and bearings? I thought I could just touch the target and it will show the speed and bearings of a target, but my test concluded otherwise.

So, my guess is I need to manually touch the menu in my Axiom MFD, and start tracking the target vessel in order to obtain the vessel's speed and bearings.

(2) Does the target vessel have to have AIS - automatic identification system (AIS) ?
http://www.youtube.com/njfishing1 - from Captain Steve
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Q24c - need to track a target in order to get the vessel speed and bearings? - ray18 - 04-02-19 03:28 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication