[DG] [DG11] Speed no run with D800/P17 and itc-5

[francisco]

Hi Derek,
The speed transducer is the same for depth and temperature.
Connections are ok, each cable color matches with each itc-5's pin.
In MFD I entered in configuration and forced the unit to search for the transducer.

As I told you in my previous post, in the local dealer they checked the ITC-5 using an MFD (not mine but one from the shop), first with my (speed/temp/depth) transducer. In this case speed appeared 0.0. Then they used one of their (speed only) transducers with which speed was shown correctly.

If you think the last point of your post "... the system thinks that the tridata is de master..." is the solution, please explain me how to do this step or let me know where to find it in the user manual.

Best regards
Francisco