Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] NMEA 183 depth gauge causes A75 MFD to re-cycle

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] NMEA 183 depth gauge causes A75 MFD to re-cycle
04-03-19, 06:03 PM (This post was last modified: 04-04-19 07:48 AM by Chuck - Raymarine - Moderator.)
Post: #3
Mickstr6 Offline
Junior Member
**
 		Posts: 7
Joined: Jul 2017
Reputation: 0
RE: [CA11] NMEA 183 depth gauge causes A75 MFD to re-cycle
Sorry, poor choice of words. The MFD is powered by it's own power cord. The problem happens when the it's connected to the network with the depth gauge. I have the 2000/183 converter (with the yellow terminal) with which I connect the 2000/0183.

I've downloaded the latest SW and will update the MFD the next trip to the boat.

A second reply, as I missed the answer to question 2. It's a Raymarine ST60. Is there a thread I can find some troubleshooting advice on? Can I send it to Raymarine? Or, should I find an independent service to see if it's worth repairing? It works fine by it's own as I said, and networked with other 0183 devices, just causes problems when networked with my A7 MFD.
Mickey D
O'Day 322
Mt Sinai, NY
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] NMEA 183 depth gauge causes A75 MFD to re-cycle - Mickstr6 - 04-03-19 06:03 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication