[CA] [CA11] Water level slider now available?

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Scott,

Unfortunately, this feature was not supported within the software offered for the a/c/e-Series MFDs (i.e. LightHouse II ... the last version of which was v19.03) and has not yet been incorporated within the latest available software for Axiom/Axiom Pro/Axiom XL and eS/gS-Series MFDs (i.e. LightHouse 3 v3.8.105). A feature request has been logged accordingly to consider this feature for inclusion within a future LightHouse 3 software update.

As a workaround you may want to consider using the Chart application's Deep Water From (MENU->PRESENTATION->DEPTH & CONTOURS->DEEP WATER FROM) setting to create a blue (lowered lake level) / white (water) boundary to denote the shoreline of the lowered lake. To do so, one would set the Deep Water From setting to the number of feet that the lake has dropped from its reference depth. Adding a value which is slightly greater than the vessel's minimum safe operating depth to the he number of feet that the lake has dropped from its reference depth will then permit the waters represented in white within the Chart application to indicate where the vessel may safely navigate.

Please click here more information concerning product and feature suggestions.