The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Depth issue
04-05-19, 08:30 AM (This post was last modified: 04-08-19 10:41 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG11] Depth issue
Hi
I am hoping you can help me with a tacktick depth problem
The boat has a complete tacktick wind speed depth system. I have a wind and speed reading but no depth. Just the 3 bars.
I have changed the transducer for a new one as the old one was giving intermittent readings but as said I have no reading at all now. The boat is in the water.
I have read a few threads about the hull transmitter. Is it a possibility the batteries need replacing ? Or is it more likely the hull transmitter isdefective ?

If it it the battery then would I need to “re introduce” the hull transmitter into the system on replacement ?

As an alternative route, I have fitted an 7” Axiom mfd. if I fitted a D800 Smart transducer into the seatalk network. Would it give me depth on the MFD.

Hoping you can throw some light onto this for me.

Many thanks.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] Depth issue - Sailingjeff - 04-05-19 08:30 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)