The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [DG] [DG11] i70s Calibration not responding

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] i70s Calibration not responding
04-07-19, 02:18 PM (This post was last modified: 04-09-19 11:58 AM by Chuck - Raymarine - Moderator.)
Post: #1
Lukes Offline
Junior Member
**
 		Posts: 3
Joined: Feb 2019
Reputation: 0
[DG11] i70s Calibration not responding
Over the winter I have fitted an itc-5 and new i70s displays - and everything seems to be working fine. But this weekend I tried to calibrate the speed in calm waters with no current. I worked through the steps for single point calibration - only to find that the up/down arrows didn’t seem to work - fine normally just not on this screen. So I then tried the multipoint calibration using SOG - only to find that when I pressed add (the Menu button) it didn’t update the recorded speed.

It’s as if the i70 can read the itc-5 but can’t write to its calibration tables.

Any ideas anyone?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] i70s Calibration not responding - Lukes - 04-07-19 02:18 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication