Threaded Mode | Linear Mode

josevmax

I have installed 2 plotters. I have an eS125 connected to the cockpit via a SeaTalkhs Network Switch (E55058) via an A80160 cable. To the SeaTalkhs Nework Switch I have connected the radar and the probe. The Es95 is also connected to the SeaTalkhs Network Switch via adapter cable A62360.
Software V19.00-00002
multimedia V17.03-00005

In addition to this I have installed Smartcontroller, Raymarine Lifetag. In the Es95 everything works correctly. But in the eS125, only maps and GPS work. The light of the SeaTalkhs Network Switch where the eS125 is connected does not turn on. If I change the eS125 for the eS95, all else unchanged,the eS95 works perfectly. It seems that it does not communicate with the SeaTalkhs Network switch nor with SeaTalkng. If you think it's necessary, I'll send you wiring diagram