Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Autopilot Integration to Seatalkng

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Autopilot Integration to Seatalkng
04-10-19, 04:47 AM
Post: #9
Zanzibar Offline
Junior Member
**
 		Posts: 5
Joined: Apr 2019
Reputation: 0
RE: [CA11] Autopilot Integration to Seatalkng
I have an old Raytheon S2 pilot that I wan5 to integrate with new Seatalkng components (AIS, new wind vane, etc...). I only have one ST7001 connected to the pilot via the first Seatalk network.

My plan is to use the SeaTalk to SeaTalkng Converter Cable supplied with the SeaTalk to SeaTalkng Converter Kit connected to the SeaTalk (yellow) socket of the SeaTalkng Converter and connect it right away to the pilot.

Will this work ?
Shall I connect only the yellow and grey wites and avoid connecting the red one ?

Emmanuel
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Autopilot Integration to Seatalkng - Zanzibar - 04-10-19 04:47 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication