The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Sharing SD card data between eS127 and Axiom
04-10-19, 10:59 PM (This post was last modified: 04-11-19 02:45 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Sharing SD card data between eS127 and Axiom
So I got my new Axiom RV installed and networked it to my eS127 everything working good but I have a few questions - I now have 3 SD card slots available (2 on the eS127 and 1 on the Axiom). FWIW I moved the NMEA 2000 connection from my eS127 over to the Axiom.

Q1 - Can you read data on the Axiom from the SD cards in eS127?

The Axiom is set to data master. All my way-points were stored on the eS127 and now I cannot find my waypoints. It appears the Axiom is picking up my Navionics SD card info from the eS127. I elected to keep the Navionics card in the eS unit for ease of access for updates and installed a blank SD card in the Axiom.

Q2 - I have the Axiom hooked up to my wireless network - can the eS127 now be updated over WiFi via the Axiom?

I selected on the Axiom MFD "check for updates" and the eS127 showed in the list for wireless updates.

Jack - MS Gulf Coast
Current Ray Equipment - Axiom 7 RV serving as DM and networked to a eS127 -
Quantum Radar via WiFi to eS127, RMK-9 networked to eS127, EV-1 Sensor Core, RV-100 and B60 transducers.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Sharing SD card data between eS127 and Axiom - MSjack - 04-10-19 10:59 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)