Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Slave E120 chartplotter crash/reboot on 3D page

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Slave E120 chartplotter crash/reboot on 3D page
04-11-19, 03:13 PM (This post was last modified: 04-11-19 03:14 PM by Chuck - Raymarine - Moderator.)
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Slave E120 chartplotter crash/reboot on 3D page
Bob,

Q. So, if I understand correctly the issue that I am having with the slave E120 choking up, crashing and re-booting is not correctable since there is too much data for the slave system to deal with over the SeaTalkhs (aka ethernet) connection.
A. Correct. Please click here to view a FAQ providing further information on this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Slave E120 chartplotter crash/reboot on 3D page - Chuck - Raymarine - Moderator - 04-11-19 03:13 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication