Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] E-classic engine data display

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E-classic engine data display
04-11-19, 03:29 PM (This post was last modified: 04-11-19 03:30 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] E-classic engine data display
Welcome back to the Raymarine Forum lotharjt,

Please click here to view a related FAQ addressing this subject. Essentially, the method of interfacing the MFD to the engine system is the same for any of Raymarine's MFDs supporting engine data. As your MFD is already interfaced to a powered and properly terminated SeaTalkng / NMEA 2000 backbone, you need simply interface the engine gateway(s) to the engine system and to a spur socket within the SeaTalkng / NMEA 2000 backbone. Please note that the data items listed within the previously referenced FAQ are for MFDs running LigthHouse II or LightHouse 3 software.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] E-classic engine data display - Chuck - Raymarine - Moderator - 04-11-19 03:29 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication