[DG] [DG11] New X-5 Wheel Pilot showing Error "No Pilot"

[Louise - Raymarine - Moderator]

Dear Oday32CC,

Thank you for the query.

Have you connected the P70 directly to the STng port on the autopilot?

This configuration would work for an old Seatalk 1 control head but not for the P70, this requires a STng backbone for operation.

The diagram you have sent in is for a seatalk 1 network, this is why your P70 is alarming no pilot.

You have to use the 5 way block to create a small STng backbone as previously explained by Derek in this thread, once you have created the backbone. The SPX-5 and the P70 will then connect via spur cables to the 5 way block in the white ports.

I hope this helps.

Many Thanks
Louise