The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] Erratic depth readings with DST800 and TackTick instruments

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Erratic depth readings with DST800 and TackTick instruments
04-20-19, 11:46 AM (This post was last modified: 04-23-19 10:49 AM by Chuck - Raymarine - Moderator.)
Post: #1
closereach77 Offline
Junior Member
**
 		Posts: 4
Joined: Mar 2019
Reputation: 0
[CA11] Erratic depth readings with DST800 and TackTick instruments
Recently installed an Airmar DST800-P617V triducer, which runs to a TackTick T121 hull transmitter, and then through the network (C95 plotter, various TackTick displays, autopilot).

The speed data and all other instrument data is reliable, but the depth data is highly erratic. In any 5 second period, I will get multiple depth numbers, most of which are 100+ feet higher than than the actual depth, with an occasionally accurate number thrown in. Doesn't seem to matter weather I'm sailing, motoring, or at a mooring.

Any ideas?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Erratic depth readings with DST800 and TackTick instruments - closereach77 - 04-20-19 11:46 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication