[CA] [CA11] Axiom Pro 9 not providing SOG over NMEA 2000 bus

[tmarks11]

Just replaced a Garmin 441 GPS with an Axiom Pro 9. The garmin was previously interfaced via a SeatalkNG-NMEA2000 cable, and my i70s displayed SOG. Now with the Axiom Pro, I am getting no SOG display on my i70s.

But the strange thing is that the Axiom Pro seems to be providing all other data to the SeatalkNG bus. It was able to upgrade firmware on all connected elements. The i70s will display the next waypoint name, distance to waypoint, etc, when the Axiom Pro is set up to "go to a waypoint".

When I select "Track Mode" on my P70s autpilot head, it gives me a warning of "No SOG available", or something like that.

In the "NMEA setup" screen on the Axiom Pro, all data items are checked as active... including "VTG (COG and Gnd Speed)". I ran the system setup to detect all data source. On the i70s, under the data sources menu, for speed, the only two sources available are "AUTO", and "ITC-5".

Running all the latest firmware on my P70s, i70s, ACU-100, EV-1, Axiom Pro 9, and ITC-5. Schematic of my setup attached.