Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Adding second depth sounder to C125 MFD
05-25-16, 03:19 PM
Post: #4
RE: Adding second depth sounder to C125 MFD
Pete,

As the CP200 is a side-looking sonar, it is not designed to report depth and should not be considered for this application. Per the prior response, an in-hull transducer should not be installed in a location where the hull is less than 1" thick. In such case a thru-hull transducer would be recommended. You may want to consider installation of a CP100 CHIRP (conical) / DownVision Sounder Module and compatible thru-hull transducer (ex. A80350 CPT-120, etc.). Alternatively, you may want to consider installation of a CP370 and a 600W low profile thru-hull transducer (ex. E66014 B117, etc.).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Adding second depth sounder to C125 MFD - Chuck - Raymarine - Moderator - 05-25-16 03:19 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)