[CA] [CA11] Seatalk NG Elbow connections

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Mark,

Unfortunately, it appears that the A06077 STNG right angle adapter was intended for use with products having SeaTalkng socket located within the lower portion of the back side of the product (ex. MFDs, etc.). In this case it would be recommended that the 5-Way Connector be replaced with a pair of SeaTalkng T-Pieces which will be joined to one another via an appropriate length of SeaTalkng Backbone Cable to permit the T-Pieces to be located within reach of each A06042 400mm STNG Elbow Cables.