The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] [TG11] Sounder Supply Voltage Too Low

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Sounder Supply Voltage Too Low
04-30-19, 08:47 AM (This post was last modified: 05-02-19 08:08 AM by Chuck - Raymarine - Moderator.)
Post: #1
ddfour1 Offline
Zamboati
***
 		Posts: 66
Joined: Feb 2016
Reputation: 0
[TG11] Sounder Supply Voltage Too Low
I have three Axiom 9's, left, center right. The center unit is the data master. When I try to run the fish finder on the left unit I get an error message saying that the sounder supply voltage is too low. But if I run the sounder on the center unit I have no issue. I am able to run the chart and radar on the display on the left. All three Axiom's get power from the same house set of batteries. Any thoughts?

By the way, thank you for all of your help over the past couple years getting me to this finished helm mostly on my own!

Dave


Attached File(s) Thumbnail(s)
       
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] Sounder Supply Voltage Too Low - ddfour1 - 04-30-19 08:47 AM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication