Raymarine forum / Raymarine Forums / Radar v / [LW] [LW11] AXIOM MFD loses Quantum radome irregularly

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] AXIOM MFD loses Quantum radome irregularly
05-01-19, 05:45 AM (This post was last modified: 05-01-19 05:55 AM by Louise - Raymarine - Moderator.)
Post: #10
Louise - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 867
Joined: Sep 2018
Reputation: 1
RE: [LW11] AXIOM MFD loses Quantum radome irregularly
Dear tonyiiiafl,

Thank you for your post.

What software versions are you currently running on the e127 and the quantum?
Is there a sufficient, consistent power supply to the radar? What is the voltage at the radar end of the cable?
Check the radar cables to make sure there is no damage link kinks or nicks in the cable run.
Is the radar connected on a HS5 switch, what colour is the LED indicator on the radar port and the frequency of the LED? Have you tried changing the port on the HS5 switch?
Have you tried plugging the radar directly in to the back of the MFD? Does the radar operate correctly?
Are all connections clean and free of corrosion/ faults?

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [LW11] AXIOM MFD loses Quantum radome irregularly - Louise - Raymarine - Moderator - 05-01-19 05:45 AM

Forum Jump:


User(s) browsing this thread: 5 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication