The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Failing 125 GPS and E80 MFD

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Failing 125 GPS and E80 MFD
05-01-19, 09:52 AM (This post was last modified: 05-01-19 02:41 PM by Chuck - Raymarine - Moderator.)
Post: #1
Camwhit_boc40 Offline
Junior Member
**
 		Posts: 2
Joined: Mar 2019
Reputation: 0
[CA11] Failing 125 GPS and E80 MFD
I have an E80 MFD with a failing 125 GPS receiver. I have been viewing the interface diagram that was referenced in another thread for connecting a 150 GPS to the system. I have located the R55006 Seatalk junction box and found that the 125 GPS comes straight into the R55006 junction box. (Pictures attached).

I have 2 questions:

First question: My boat doesn’t have the D244 distribution block. It worked with this arrangement up to this failure (10+ years), so I’m guessing that the distribution block isn’t required for my system. Is this a problem?

Second question: There is no power lead currently coming into the R55006 junction box. Do I still need a power lead to the new Seatalk to SeaTalkNG converter? If so, where do I pull the power from? Should it come off the same panel circuit as the rest navigation system?


Attached File(s) Thumbnail(s)
       
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Failing 125 GPS and E80 MFD - Camwhit_boc40 - 05-01-19 09:52 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication