[CA11] Erratic depth readings with DST800 and TackTick instruments

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Erratic depth readings with DST800 and TackTick instruments

05-03-19, 06:48 AM

Post: #5

closereach77 Offline

Junior Member

Posts: 4
Joined: Mar 2019
Reputation: 0

RE: [CA11] Erratic depth readings with DST800 and TackTick instruments

Chuck,
I got on the boat yesterday to do this. Turned on the instruments only (no plotter) and monitored the depth reading for 10 minutes or so while doing some other things. It was consistent/accurate.

I then started the engine...and immediately started getting erratic readings again. Engine off, and the readings became accurate.

Ugh! Any other ideas? I have not checked data sources on the MFD yet, thinking that might be a red herring in light of the above.

Thanks.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Erratic depth readings with DST800 and TackTick instruments - closereach77 - 04-20-19, 11:46 AM

RE: [CA11] Erratic depth readings with DST800 and TackTick instruments - Chuck - Raymarine - Moderator - 04-23-19, 12:20 PM

RE: [CA11] Erratic depth readings with DST800 and TackTick instruments - closereach77 - 04-28-19, 02:31 PM

RE: [CA11] Erratic depth readings with DST800 and TackTick instruments - Chuck - Raymarine - Moderator - 04-29-19, 09:32 AM

RE: [CA11] Erratic depth readings with DST800 and TackTick instruments - closereach77 - 05-03-19 06:48 AM

RE: [CA11] Erratic depth readings with DST800 and TackTick instruments - Chuck - Raymarine - Moderator - 05-06-19, 10:55 AM

User(s) browsing this thread: 2 Guest(s)