The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] SX30 and P70

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] SX30 and P70
05-06-19, 04:22 PM (This post was last modified: 05-08-19 03:34 PM by Chuck - Raymarine - Moderator.)
Post: #1
QJoy Offline
Junior Member
**
 		Posts: 2
Joined: Jun 2016
Reputation: 0
[CA11] SX30 and P70
I have made tempory repairs to my Whitlock autopilot rotary drive model du145 and reconfiguring using the dockside wizard on the P70 control head with x30 with rudder reference. When calibrating it finds 26deg on rudder travel which is fine but next step when it actually moves the rudder with the drive it goes a obout a 1/4 turn stops. Next step 1/4 turn to center stops. Next step gives error "values too close".
I have done a factory reset on P70 but same error.
Any ideas?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] SX30 and P70 - QJoy - 05-06-19 04:22 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication