[DG] [DG11] Axiom Pro S Depth Options
|
05-07-19, 10:32 AM
(This post was last modified: 05-07-19 10:47 AM by Derek - Raymarine - Moderator.)
Post: #4
|
|||
|
|||
RE: [DG11] Axiom Pro S Depth Options
Hi neflier,
You will find it useful to read through this FAQ which describes the STng network, location of terminators, rules for NME 2000 configuration, ( for example a spar can be up to 6m long which might be a better way to connect the network to the AXIOM in the Navpod instead of leading the backbone up there and terminating it). Please use the STng to NMEA2000 cable - A06075 instead of trying to make your own cable, we have so many reports of system errors triggered by self -fit connectors and they can be difficult to track down in a large network. Pinouts for the Female St50 connector With regards to the power draw, the Axiom PRO will draw less than 50mA when it is powered down, but not isolated. I will check for the specific value and update. Thanks Derek |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[DG11] Axiom Pro S Depth Options - neflier - 04-22-19, 06:54 PM
RE: [DG11] Axiom Pro S Depth Options - Derek - Raymarine - Moderator - 04-24-19, 10:37 AM
RE: [DG11] Axiom Pro S Depth Options - neflier - 05-02-19, 11:09 PM
RE: [DG11] Axiom Pro S Depth Options - Derek - Raymarine - Moderator - 05-07-19 10:32 AM
RE: [DG11] Axiom Pro S Depth Options - neflier - 05-07-19, 01:09 PM
RE: [DG11] Axiom Pro S Depth Options - Derek - Raymarine - Moderator - 05-08-19, 07:57 AM
RE: [DG11] Axiom Pro S Depth Options - neflier - 05-19-19, 09:37 PM
RE: [DG11] Axiom Pro S Depth Options - Derek - Raymarine - Moderator - 05-22-19, 10:46 AM
|
User(s) browsing this thread: 3 Guest(s)