Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] C90W Trackwheel

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] C90W Trackwheel
05-07-19, 03:31 PM (This post was last modified: 05-08-19 07:48 AM by Chuck - Raymarine - Moderator.)
Post: #11
mauruuru Offline
Junior Member
**
 		Posts: 13
Joined: Oct 2016
Reputation: 0
RE: [CA11] C90W Trackwheel
Ok I finally got around to attempting to repair the track wheel--no joy. That leaves me with the option of just leaving it off or replacing the whole MFD.
Your previous responses indicated that everything would be compatible with the newer Axiom or Axiom Pro series MFD except for the DSM 300 which can not be used. However, it is not clear if the transducer currently connected to the DSM300 has to be replaced or if it can be interfaced with the new Axiom or Axiom Pro.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] C90W Trackwheel - mauruuru - 01-17-19, 06:30 PM
RE: [CA11] C90W Trackwheel - mauruuru - 02-01-19, 01:24 PM
RE: [CA11] C90W Trackwheel - Waveform - 12-06-19, 02:03 PM
RE: [CA11] C90W Trackwheel - mauruuru - 02-04-19, 12:01 PM
RE: [CA11] C90W Trackwheel - mauruuru - 02-04-19, 10:56 PM
RE: [CA11] C90W Trackwheel - mauruuru - 02-05-19, 10:42 AM
RE: [CA11] C90W Trackwheel - mauruuru - 05-07-19 03:31 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication