Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] eS127 / LH3.9 - unable to connect to WiFi hotspot

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] eS127 / LH3.9 - unable to connect to WiFi hotspot
05-09-19, 01:22 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] eS127 / LH3.9 - unable to connect to WiFi hotspot
Welcome to the Raymarine Forum Colin,

Q1. Has this functionality been removed?
A1. This feature has never been included within LightHouse 3 software for eS/gS-Series MFDs. This feature is only supported within LightHouse 3 software for eS/gS-Series MFDs. Support for LightHouse 3 within the eS/gS-Series MFDs was primarily intend for systems mixed systems (i.e. those containing both Axiom/Axiom Pro/Axiom XL and eS/gS-Series MFDs).

Q2. Is it going to be replaced.
A2. Negative. Should this feature be required, then it would be recommended that the MFD's software be downgraded to LightHouse II v19.03.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] eS127 / LH3.9 - unable to connect to WiFi hotspot - Chuck - Raymarine - Moderator - 05-09-19 01:22 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication