[CA] [CA11] Follow-On Tiller Installation and Setup

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum TideRace,

Please note that you autopilot must feature a p70RS or p70R autopilot control head and this mode must be commanded through the autopilot control head. This feature is not supported for use with the p70S and p70 autopilot control heads. You will first need to go into Drive settings and configure the drive settings power steer mode to proportional (MENU->SET-UP->AUTOPILOT CALIBRATION->DRIVE SETTINGS->POWER STEER->PROPORTIONAL). Next, press the CANCEL/BACK option several times until all menus have been exited. Finally, press MENU->MODE->POWER STEER.