Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Follow-On Tiller Installation and Setup
05-12-19, 04:29 PM (This post was last modified: 05-13-19 09:33 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Follow-On Tiller Installation and Setup
Hi Chuck,
Thanks for the reply. I have the p70RS. “Power Steer” does not show up in Drive Settings. Since posting my question I’ve checked a couple of things. In Diagnostics, the pilot lists all of the components of the system except the rudder sensor. When I performed the ohm test that you posted elsewhere on this forum I got nothing for red-blue and red-green and an erroneously high reading for green-blue. So, it appears that the rudder sensor is not working. Having taken the time to reread the pilot commissioning instructions again, which I may have misinterpreted, I’m not sure it ever was working. I have a new rudder sensor on the way. I will report back.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Follow-On Tiller Installation and Setup - TideRace - 05-12-19 04:29 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)