[CA] [CA11] Help with odd sonar readings
|
05-13-19, 02:10 PM
Post: #2
|
|||
|
|||
RE: [CA11] Help with odd sonar readings
Welcome to the Raymarine Forum Farmhand,
The ping for any Fishfinder channel may be enabled or disabled by displaying the fishfinder channel to be enabled or disabled, and then using the command sequence MENU->SETTINGS->SOUNDER->PING ENABLE. It is recommended that the ping be disabled for the 50kHz and 200kHz Fishfinder channels. After doing so, it is recommended that all other electronics, systems, and engines be switched OFF. After doing so, please test the system again and take some new screen snapshots. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Help with odd sonar readings - Farmhand - 05-11-19, 03:08 PM
RE: [CA11] Help with odd sonar readings - Chuck - Raymarine - Moderator - 05-13-19 02:10 PM
RE: [CA11] Help with odd sonar readings - Farmhand - 05-17-19, 07:13 AM
RE: [CA11] Help with odd sonar readings - Chuck - Raymarine - Moderator - 05-17-19, 08:06 AM
RE: [CA11] Help with odd sonar readings - Farmhand - 05-19-19, 07:08 PM
RE: [CA11] Help with odd sonar readings - Chuck - Raymarine - Moderator - 05-20-19, 12:19 PM
RE: [CA11] Help with odd sonar readings - Farmhand - 05-20-19, 12:58 PM
RE: [CA11] Help with odd sonar readings - Chuck - Raymarine - Moderator - 05-20-19, 01:38 PM
RE: [CA11] Help with odd sonar readings - Farmhand - 05-20-19, 02:38 PM
RE: [CA11] Help with odd sonar readings - Chuck - Raymarine - Moderator - 05-20-19, 03:15 PM
|
User(s) browsing this thread: 9 Guest(s)