Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom Pro no data on NMEA2000

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Pro no data on NMEA2000
05-16-19, 08:54 AM (This post was last modified: 06-13-19 08:22 AM by Chuck - Raymarine - Moderator.)
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom Pro no data on NMEA2000
LimaBavo,

Unfortunately and as you have suggested, the Axiom Pro MFD appears to have suffered a failure of its NMEA 2000 communications circuitry. Should the MFD have been purchased within the last 30 days, then it would be recommended it be returned to your Raymarine dealer for replacement. Otherwise, the MFD will need to be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom Pro no data on NMEA2000 - Chuck - Raymarine - Moderator - 05-16-19 08:54 AM

Forum Jump:


User(s) browsing this thread: 5 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication