[DG11] Type 100 Drives to STBD, not PORT

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[DG] [DG11] Type 100 Drives to STBD, not PORT

05-16-19, 09:06 AM (This post was last modified: 05-16-19 10:30 AM by Derek - Raymarine - Moderator.)

Post: #3

Keith Pleas Offline

Member

Posts: 50
Joined: Apr 2016
Reputation: 0

RE: [DG11] Type 100 Drives to STBD, not PORT

Hi Derek - thank you for the detailed response.

I think this is exactly my problem - so which are the MOTOR wires and the POWER wires in the image in my first post? I think I see the word MOTOR behind the right pair, and just a W behind the left (heavier gauge) pair. So you're saying, remove the two right ones and "dab" them into the left ones - are those metal-looking openings in the middle of each terminal conductive? Or do I have to pull out the POWER wires to expose them (the left-most looks partially exposed)?

Lulu: 36' Little Harbor WhisperJet
Raymarine: Axiom 12 RV, RV200, Axiom 12 Pro, Evo 1/ACU 150/P70RS, Quantum Q24C, HS5
---previous----
Refugio: 44' trawler
Raymarine: ACU-400, EV-1, P70R, a78, M81105 RFU, ST60 RAI, E22158 ST-STNG
NMEA 2000: Garmin 740S & GMR18 HD, Airmar WS-200WX, Actisense NGT-1

« Next Oldest | Next Newest »

Messages In This Thread

[DG11] Type 100 Drives to STBD, not PORT - Keith Pleas - 05-14-19, 01:07 PM

RE: [DG11] Type 100 Drives to STBD, not PORT - Derek - Raymarine - Moderator - 05-15-19, 09:15 AM

RE: [DG11] Type 100 Drives to STBD, not PORT - Keith Pleas - 05-16-19 09:06 AM

RE: [DG11] Type 100 Drives to STBD, not PORT - Derek - Raymarine - Moderator - 05-17-19, 09:29 AM

RE: [DG11] Type 100 Drives to STBD, not PORT - Keith Pleas - 05-20-19, 04:21 PM

RE: [DG11] Type 100 Drives to STBD, not PORT - Derek - Raymarine - Moderator - 05-22-19, 10:50 AM

RE: [DG11] Type 100 Drives to STBD, not PORT - Keith Pleas - 05-22-19, 11:01 AM

RE: [DG11] Type 100 Drives to STBD, not PORT - Derek - Raymarine - Moderator - 05-22-19, 11:47 AM

RE: [DG11] Type 100 Drives to STBD, not PORT - Keith Pleas - 05-24-19, 08:50 AM

RE: [DG11] Type 100 Drives to STBD, not PORT - Louise - Raymarine - Moderator - 05-31-19, 10:54 AM

User(s) browsing this thread: 1 Guest(s)