[DG] [DG11] ST60+ wind

[Stormcruiser]

Hi Derek, Thanks for your advise, I have now been to the top of the mast and been able to test the unit further.
With the MHU conected to the ST60+ we have around 7.5v on the Red supply wire (Measured at base of mast)
The Blue and Green both return sine wave signals back down to the ST60+ ranging from +2v to +4v, based on the wind direction, with Blue peaking at +4v at 90 degree Stbd and Green peaking at +4v with wind dead ahead (measured at base of mast and on back of ST60+)
With the ST60+ connected, circling the wind vane through 360 degrees, only oscilates the displayed wnd angle between 30 and 170 degrees to port.
The voltages on the Blue and Green lines look a little lower than I was expecting. Are they enough?
Or is this more likley to be a problem in the ST60+ unit?