The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Software update issues

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Software update issues
05-19-19, 10:18 AM (This post was last modified: 05-23-19 09:42 AM by Chuck - Raymarine - Moderator.)
Post: #1
laurentdubois Offline
Junior Member
**
 		Posts: 8
Joined: May 2018
Reputation: 0
[CA11] Software update issues
My current system includes the following devices:
axiom 9 MFD
i70s instrument
autopilot EV100 wheel

After performing a software update to install the latest LH3 version (3.9.46), using the zip downloaded from the raymarine website and extracted to a mSD card, the i70 instrument is no longer displaying data (showing -- instead of a value) and the autopilot is displaying a "no drive detected" error when engaged.
The axiom MFD is working fine.

My understanding is that the axiom zip contains all required updates for these devices (in addition to ones for the axiom) and there is no need to perform individual updates for the i70 or the autopilot components.

The whole system was recycled after the update (which was successful based on the messages displayed on the MFD once complete).

What am I missing?

Thanks in advance
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Software update issues - laurentdubois - 05-19-19 10:18 AM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication