Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] setup 37stv to point to 72.7 sat for dish
05-21-19, 05:51 AM (This post was last modified: 05-21-19 07:39 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [TG11] setup 37stv to point to 72.7 sat for dish
Thank you Tom for the in depth reply. It is very helpful and I will test your information this weekend at the boat. I am currently using the Gen 1 37stv and it seems to work fine as of now except for 1 group of channels. I'm currently on 61.5 and 110 which gives me "most" of my channels. I may be running down the rabbit [censored] with the 72.7 and may not even be needed but I was looking at my HOME dish network sat info and it tracks 61.5 and 72.7 at home. Maybe its because its a different dish but speaking with one of the Raymarine techs on the phone out here, they told me to use 61.5 (or 129) and 110 so that's how I have it now setup.

While I have you, can I ask what the difference is between DVB and SIGNAL tracking? on 615 I can only track when set to signal but the info I have says to set that to DVB?

Thanks again!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] setup 37stv to point to 72.7 sat for dish - unixdood - 05-21-19 05:51 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)