The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / AIS v / [CA] [CA11] AIS 500 Stuck in Silent Mode

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] AIS 500 Stuck in Silent Mode
05-21-19, 07:23 AM (This post was last modified: 05-21-19 09:04 AM by Chuck - Raymarine - Moderator.)
Post: #1
[email protected] Offline
Junior Member
**
 		Posts: 3
Joined: Feb 2019
Reputation: 0
[CA11] AIS 500 Stuck in Silent Mode
I recently purchased a used boat with a Raymarine system including an AIS 500. The system was previously functional. The MMSI # has been transferred to me. Nothing else has changed or been reset. It appears that the AIS 500 is stuck in silent mode. I am receiving AIS information but not transmitting. I can see the menu option on my e140 W to come out of silent mode however it will not. Also the AIS LED status light is Amber not Blue indicating that the AIS has not been transmitting. Is it possible that the external GPS antenna has failed on the AIS and if so is there a way to verify that. Is there any other troubleshooting that I can perform.


Thanks in advance
Marc
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] AIS 500 Stuck in Silent Mode - [email protected] - 05-21-19 07:23 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication