The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Radar v / [CA] [CA11] Upgrade problems to Axiom

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Upgrade problems to Axiom
05-27-19, 01:47 PM (This post was last modified: 06-03-19 02:13 PM by Chuck - Raymarine - Moderator.)
Post: #1
S Guttilla Offline
Junior Member
**
 		Posts: 7
Joined: Jun 2018
Reputation: 0
[CA11] Upgrade problems to Axiom
I have an Axiom 9 using Navionics+ Charts and a Quantum Radar connected via WIFI.
All systems worked perfectly before upgrading. After I performed the upgrade, the MFD
could not connect to the Radar. It was then that I realized that I had inserted a switch to provide power to the radar only when I wanted to use it and I had not turned the switch on before beginning the upgrade. I powered the radar up and then told the system to re-install the upgrade. It did that, again with no errors. It still cannot connect to the radar. What am I missing?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Upgrade problems to Axiom - S Guttilla - 05-27-19 01:47 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication