[CA11] Fluid Level Sensors - Maretron or Garmin

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Fluid Level Sensors - Maretron or Garmin

05-28-19, 08:28 AM (This post was last modified: 05-28-19 10:22 AM by Chuck - Raymarine - Moderator.)

Post: #4

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] Fluid Level Sensors - Maretron or Garmin

Welcome to the Raymarine Forum Toles,

As indicated above, MFDs running LightHouse 3 v3.9.46 or later software will support tank level sensor calibration in system featuring the specified models of tank level sensors specified within the FAQ referenced above. While any NMEA 2000 certified fuel flow sensor(s) may be used with Raymarine products, any calibration or configuration (ex. for Instance ID) may need to be configured via a display or configuration hardware/software offered by the sensor's manufacturer.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Fluid Level Sensors - Maretron or Garmin - headshothills - 09-07-17, 11:22 AM

RE: [CA11] Fluid Level Sensors - Maretron or Garmin - Chuck - Raymarine - Moderator - 09-12-17, 04:02 PM

RE: [CA11] Fluid Level Sensors - Maretron or Garmin - Toles - 05-28-19, 04:12 AM

RE: [CA11] Fluid Level Sensors - Maretron or Garmin - Chuck - Raymarine - Moderator - 05-28-19 08:28 AM

User(s) browsing this thread: 1 Guest(s)