Raymarine forum / Raymarine Forums / Thermal Cameras v / [TG] [TG11] Flir m132 -clear cruise feature

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Flir m132 -clear cruise feature
05-29-19, 06:56 AM (This post was last modified: 05-29-19 09:33 AM by Chuck - Raymarine - Moderator.)
Post: #5
rltrbill Offline
Member
***
 		Posts: 75
Joined: Feb 2016
Reputation: 0
RE: [TG11] Flir m132 -clear cruise feature
No problem. I will back up my data and do a reset and let you know. I was planning on it anyway because the Sirius 150 is causing some random re-boots.

I have a es128(set as master) and es98(slave)- do I only reset the master? Both? If so, what order? They were both updated to LH3 at the same time and NOT factory reset.....
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] Flir m132 -clear cruise feature - rltrbill - 05-29-19 06:56 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication