[TG] T070 Race Master Problem Turning On
|
05-29-19, 07:05 PM
(This post was last modified: 05-29-19 07:26 PM by Tom - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: T070 Race Master Problem Turning On
Hello barneyk,
Sorry it's taken a while for us to get back to you. Apart from a battery that's not holding its charge for the original span once it has been charged - a full charge indicator unfortunately doesn't tell us how long it will be able to maintain that level - and an internal fault, one possible cause is that there's contamination in behind the buttons. On the Wireless Instrument range the buttons are optical, with a white patch on the rear of the button which triggers a sensor inside the clear case. If salt or other grime has crept in there, it can block the button sensor. To check this, lay the Race Master on a cloth on its front and use a large flat-blade screwdriver in the narrower slots around the edge to gently lever the cosmetic-only grey cover away from the clear water-resistant enclosure. Once you have the cover away, check that the clear patch above the buttton sensors and the white patches on the rear of the buttons are clean. If in doubt, clean gently with a tissue and fresh water. See the attached photo. If this doesn't solve the problem, it might be a good idea to get the Race Master checked by your dealer. Regards, Tom Raymarine since 1999. Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras Location: Sydney, Australia. Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
T070 Race Master Problem Turning On - barneyk - 05-21-19, 05:18 PM
RE: T070 Race Master Problem Turning On - Tom - Raymarine - Moderator - 05-29-19 07:05 PM
|
User(s) browsing this thread: 2 Guest(s)