Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] [TG11] Estimated fuel level and distance to empty at zero

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Estimated fuel level and distance to empty at zero
05-30-19, 07:10 PM
Post: #9
mark d Offline
Junior Member
**
 		Posts: 13
Joined: May 2018
Reputation: 0
RE: [TG11] Estimated fuel level and distance to empty at zero
Hello Tom and Jeepswag,
I read this with interest as I have the same issue with a DF140 2012.
After successfully hooking up axiom 12 to engine via Suzy interface I am able to to see (engine hours, litres per hour, engine temp) and for a while there (est fuel remaining) which was very accurate.
est fuel remaining has gone and now shows dashes not numerals, I went through fuel setup and now fuel messages are not detected, this happened randomly once while using the boat and I was able to re enter data, the second time was after latest software update and now cannot enter values.

So I hope you blokes can come up with the solution.
Many thanks Mark
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] Estimated fuel level and distance to empty at zero - mark d - 05-30-19 07:10 PM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication