Raymarine forum / Raymarine Forums / Multifunction Displays v / Interfacing Raymarine to Standard horizon

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Interfacing Raymarine to Standard horizon
05-31-16, 10:29 AM (This post was last modified: 05-31-16 10:51 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Interfacing Raymarine to Standard horizon
Welcome to the Raymarine Forum hiltz,

Should the third party chartplotter also support 4800 BAUD NMEA 0183 v3.01 communications, then its NMEA 0183 output leads may be interfaced to the NMEA 0183 input leads of the C-Series Classic MFD's NMEA 0183 Cable to support sharing GPS data with the C-Series Classic MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Interfacing Raymarine to Standard horizon - Chuck - Raymarine - Moderator - 05-31-16 10:29 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication