Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Can't Get Plotter Sync to Work

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Can't Get Plotter Sync to Work
06-03-19, 07:42 AM
Post: #8
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Can't Get Plotter Sync to Work
Instigator40,

As indicated within this thread, a fault has been found within the Navionics software libraries utilized within the LightHouse 3 v3.9.46 software update. This issue will prevent synchronization of waypoint/route data between the Navionics Boating app and MFDs running LightHouse 3 v3.9.46 software. This issue is expected to be corrected within the upcoming LightHouse 3 v3.10.x software update. As indicated, should there be an immediate need to utilize this feature and should workaround supplied by Navionics and indicated within this thread not correct the issue then it would be recommended that the MFD's software be downgraded to LightHouse 3 v3.8.105.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Can't Get Plotter Sync to Work - Chuck - Raymarine - Moderator - 06-03-19 07:42 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication