Raymarine forum / Raymarine Forums / Radar v / [CA] [CA11] Upgrade problems to Axiom

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Upgrade problems to Axiom
06-03-19, 02:19 PM (This post was last modified: 06-03-19 02:20 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Upgrade problems to Axiom
Welcome to the Raymarine Forum S Guttilla,

Please click here to view a thread in which I had recently addressed this subject. If following the downgrade to LH3 v3.8.105, update to the radome software, and then subsequent update to LH3 v3.9.46 the problem continues to persist, then it would be recommended that a Power ON Reset be performed to the system's MFDs. Should a problem be reported with the Quantum radome thereafter, then please click here to view a FAQ addressing how to troubleshoot/fault isolate the problem with the Quantum radome and recommended action to be taken if a fault has been found within the Quantum radome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Upgrade problems to Axiom - Chuck - Raymarine - Moderator - 06-03-19 02:19 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication