[CA] [CA11] AIS 700 - Message: "AIS off" -

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Ganzi,

In order to utilize the AIS feature of an i70S/i70 MFID, the system requires each of the following data inputs:
- data from an AIS receiver/transceiver
- GPS data ... note that this data will not be provided to the system by the AIS700
- heading or COG data (the latter will only satisfy the system's requirement if the vessel is moving at a speed of at least 1-2kts.

What is the source of GPS data for your system? Should your system not feature a source of GPS data, then it would be recommended that a Raystar 150 GPS Sensor be added to the system.