Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Upgrade & Network System Integration

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Upgrade & Network System Integration
06-05-19, 12:23 PM (This post was last modified: 06-05-19 12:26 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Upgrade & Network System Integration
Welcome to the Raymarine Forum JP,

With the exception of the ST290 analog displays (these feature a SeaTalk communications interface as your diagram also acknowledges), ST290 products (DPU, Graphic/Data displays) are not supported (neither designed nor tested) for use within Raymarine's currently manufactured products. Unfortunately, the largest graphical displays offered by Raymarine are the i70S MFIDs.

Regarding the AIS700, as indicated within FAQ found here, the AIS transceiver must be interfaced to the E-Series Classic MFD's NMEA 0183 communications interface rather then via SeaTalkng/NMEA 2000.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Upgrade & Network System Integration - Chuck - Raymarine - Moderator - 06-05-19 12:23 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication