[LW] [LW11] Wind instrument shows mast batt

[Louise - Raymarine - Moderator]

Dear jools,

It can be. In many tests we have not seen any problems caused by carbon fiber components in a boat, however, mounting Transmitters inside a boat constructed totally of carbon fiber will reduce signal strength which may vary when the carbon fiber components are wet. It is also not recommended to mount a display flat onto a carbon fiber surface as there may be some detuning of the antenna. If using carbon fiber mast brackets it is recommended that holes are cut in the brackets behind the displays to prevent possible problems. Tacktick do NOT recommend the use of the clip bracket when displays are mounted to a mast bracket. Lines associated with sail control can get caught on displays causing them to become detatched.

Is the wind display getting a full charge? It is worth sending it in for testing, you can book this in here.

Many Thanks
Louise