[CA] [CA11] R28171 Wind fails in high winds

[AndrewSimon]

I installed a new R28171 Wind Transducer in my boat 3 years ago with ST-70 displays, and an already installed and wired Wind module. I also changed out one of ST-70 displays for an ST-60 mechanical wind instrument and wired it to an existing ST-70 display using a Raymarine adapter cable.
Everything works correctly until the wind speed gets up to around 25 knots. Then all the displays showing wind stop working. The ST-60 instrument goes to the 12 O'clock position for wind direction with 3 dashes shown for wind speed. The ST-70 displays do not show any wind direction or speed. All other ST-70 displays continue to show depth and boat speed correctly. No problem also with my E120W.